|
Author
|
Topic: My Evolver gets crazy!!
|
sonictransportsystem
EX5Tech Newguy
Member # 6530
|
posted February 04, 2008 04:07 AM
    
Hi to everyone! Sometimes my dektop evolver, when is playing sequencer and tweaking the knobs starts to change the values alone, with the speed of seconds on a clock, and the sequencer led starts blinking and i need to turn off the synth and then turn on again....its really strange! So if you have any idea please help me.  P.S. that happens with midi clock internal and external.
Thanks a lot
Cheers Pedro Dias
www.myspace.com/sonictransportsystem
Posts: 7 | From: Portugal | Registered: Feb 2008 | IP: Logged
|
|
|
|
|
|
sonictransportsystem
EX5Tech Newguy
Member # 6530
|
posted February 09, 2008 12:15 PM
Hi,
This is something that just happens occasionaly, but is always bad.
i was looking for the values changing and it seems that what changes alone is only the program numbers, not the values of the knobs im tweaking, either i was not tweaking this time just pushing buttons of the programming matrix, this time i didnt reboot the Evolver, just pushing all buttons to see if he stop without rebooting, and then he stops im sure that was not cause i push all the buttons to see if he stop, it seems that he stops when finish counting the 128 programs of the 4 banks. It was this that was happening, but cause i was tweaking the same time i didnt understand that what changes is program numbers and not the data of the last knob i tweak....next time im going try to see even more clearly whats happening!
Cheers Pedro
Posts: 7 | From: Portugal | Registered: Feb 2008 | IP: Logged
|
|
|
UBBFriend: Email this page to someone!
