|
Author
|
Topic: saving / loading evolver data on PC
|
t?ftler
EX5Tech Newguy
Member # 6711
|
posted June 02, 2008 11:10 AM
    
hi,
I got the evolver desktop and I'm just learning to use it.
I have real trouble with saving and loading data using the soundtower editor (PC). I tried with MidiOX too. maybe someone can help:basicly what I want to do, is saving Banks I've edited (with the "write" command -> ok) and save them on my PC to later reload them when I need them. Now I'm a little confused with the different formats (ebp & syx) and the different ways of saving data (save all evolver data, write program, transmit bank, save program bank, save single program, initialize)
I don't think it would be any help for you to tell you everything I allready tried.
Maybe if you could just give me "a little step by step tutorial" to explain the saving process, that would be it! 
Furthermore I loaded the factory presets (the ones I could load) from the dave smith page. unfortunately those were not the same sounds I had on my evolver when I bought it. well... thats a pity.
Thank you very much in advance for your help!! 
t?ftler
Posts: 3 | From: Switzerland | Registered: Jun 2008 | IP: Logged
|
|
QMC
EX5Tech Newguy
Member # 4491
|
posted August 06, 2008 08:16 AM
First,check the midi connection.If ok,the main window should read "evolver online"In the main window (not the one with the knobs etc),you are seing all the 4 banks with their 128 presets.To save one of them,A,B..go to the toolbar "Program -> Save Program Bank-choose where-name it ****.ebp" that's it. To save a preset in a bank,use
1.The Evo itself.Press the "MAIN" button for 2 sec,it will start to blink.If then you press it on more time,it will write the program you edited in the memory.
2."Write" button in the "Program Edit" window-yes,the one with the knobs.You can choose where to save ,in what bank and prog number,this way.
3.The Main Window : ctrl-W(Program ->Write Program),or "Write P" Now to load a bank,you should do 2 things:
FIRST,load the bank in the editor "Program -Load Program Bank To-A,B,C,or D ,browse for it and it's done.Let's say you want to load a bank in Bank D,for the next paragraph.
SECOND,you have to actually transmit the bank to the Evo :"Program ->Transmit Bank->D->the Transmit Program Banks window pops up-> press START,in a few seconds,the programs of that bank will be written in the EVO.
To load a preset,in the Main Window,right click on the preset position you want overwritten,and choose load program,browse,etc...then actually write it in the evo,i recommend the "main" button thing from above.
Posts: 1 | From: | Registered: Nov 2005 | IP: Logged
|
|
|
UBBFriend: Email this page to someone!
